|
|
530.215 Mechanics-Based Design |
| Instructor: |
Prof.
Tza-Huei (Jeff) Wang |
| Class taught: |
MWF at 11 am ,
Hodson 311 |
| Office: |
108 Latrobe / 118 Clark |
|
Office number: |
410-516-7086 |
| Email: |
thwang@jhu.edu |
**The
classroom for Midterm II (11:00-11:50 am, April 11) will be relocated to
Olin 305.
|
Textbook: |
1. “Statics and Mechanics of
Materials”, R.C. Hibbeler, Prentice Hall, 2nd Edition
2. “Shigley’s Mechanical Engineering Design”, R.G. Budynas and
J.K. Nisbett |
| Grading: |
Homework 30 %, Midterm exam 25
%, Lab 20 %, Design Project 10 %, Final exam 15 % |
| Homework: |
Homework will be due one week after it
has been given, except when otherwise advised. Homework must be
submitted at the beginning of the class on the day it is due. Late
submissions will be penalized 20 % for every day it is late up to
one week. After one week, homework will not be accepted. |
| Exams: |
Midterm I (Mar. 5), Midterm II (Apr.
11), Final (May 14, 2-5pm) |
| Labs: |
Laboratory times are W. 3:30-5:00pm,
Th. 1:30-3:00pm or Th. 4:30-6:00pm. Laboratory locations will be
identified as needed (Krieger HAC or Wyman 163). You may choose
between the three laboratory times at the beginning of the semester.
Attendance at the laboratories is mandatory. There will not
necessarily be a laboratory every week; there are no laboratories in
the first week. |
| Grading: |
Homework (30%), 2 Midterm exams (25%),
Labs (20%), design Project (10%), Final exam (15%) |
| TAs: |
Kyle Azevedo (kazevedo@jhu.edu); Erik
Phillips(ephill13@jhu.edu) |
| TA Office Hours: |
Mondays: 8-10 pm & Tuesdays: 4-6 pm at
Latrobe 213 |
Course Topics (Download):
-
The Fundamentals of Design
(Reading: B&N 1.1-1.15)
-
Combined Static Loading
(Reading: H 15.1-15.10; B&N 3.1-3.17)
-
Buckling
-
Complex Stress States
-
The Specification of
Dimensions
-
The Specification of
Materials
-
Failure of Materials And
Structures
-
Fatigue Failure
-
Design of Fasteners And
Joints
-
Design of Helical Springs
-
Design of Shafts
-
Selection of Bearings and
Lubrication
-
Design of Clutches and
Brakes
-
Design of Gearing
Homework:
Laboratory & Design
Project Schedule:
Session times:
Session I (W. 3:30-5:00 PM); Session II (Th. 1:30-3:00
PM);
Session III (Th. 4:30-6:00 PM)
|